Search
ProduCTS
News
Tribology
High-pressure hoses - 840 bar
| Item No. | D | D1 | Grease | m / coil | Box | Palett |
|---|---|---|---|---|---|---|
| 100-001 | 8,6 | 4,0 | NLGI class 2 | 50 m | 250 m | 3000 m |
| 100-002 | 8,6 | 4,0 | empty | 50 m | 250 m | 3000 m |
| 100-011 | 11,3 | 6,3 | NLGI class 2 | 50 m | 200 m | 2000 m |
| 100-012 | 11,3 | 6,3 | empty | 50 m | 200 m | 2000 m |
| 100-011-1 | 11,3 | 6,3 | NLGI class 2 | 100 m | 200 m | 2000 m |
| 100-012-1 | 11,3 | 6,3 | empty | 100 m | 200 m | 2000 m |
Technical Information
Fritsche 600-840 bar high-pressure hoses are suitable for grease and central lubrication systems of all conventional lubrication system manufacturers.
The structure of this type of high-pressure hose (600-840 bar) is such that an inner polyamide 6 (PA6) tube is encased and embedded in polyester mesh. The outer polyurethane coat is adhered onto the polyester mesh and the inner tube. Only this structure provides the required high compressive strength to our hose and ensures indispensable safety for assembly.
Of course, the hose is also guaranteed to provide high flexibility.
For many physiological applications, separate requirements often apply, which must be checked case-specifically by the customer.
The responsibility for the implementation, mounting and use of high-pressure hoses is not the responsibility of Fritsche GmbH & Co.KG.
The warranty is limited to the specification of this technical data sheet.
Further warranties will not be accepted.
|
|
|
100-001 / 100-002 | 100-011 / 100-012 | ||
|---|---|---|---|---|---|
|
|
|
Inner Tube | Casing | Innter tube | Casing |
| Material |
|
Termopl. Polyamid 6 | Termopl. Polyurethan | Termopl. Polyamid 6 | Termopl. Polyurethan |
| Tear strength | DIN EN ISO 527 | > 30N/mm2 | > 18N/mm2 | > 30N/mm2 | > 18N/mm2 |
| Elongation at break | DIN EN ISO 527 | > 50% | > 380% | > 180% | > 380% |
| Hardness shore | DIN EN ISO 868 | > D 60 +/- 3 | > A 88 +/- 3 | > D 60 +/- 3 | > A 88 +/- 3 |
| Permissable bending radius |
|
20°C >20 mm | 20°C > 45 mm | ||
| Operating temperatur | -40°C bis 80°C for mediums to be pumped with "grease with corrosion protection additives": max. 70°C |
| Cracking pressure | DIN EN ISO 1402 pressurisation: 60s 20°C >840bar (84 MPa, 12184 psi), 60°C >460 bar, |
Sizes and Tolerances
| Item No. | 100-001 / 100-002 | 100-011 / 100-012 |
|---|---|---|
| Nominal size | 4,0 x 8,6 mm d (internal & external | 6,3 x 11,3 mm |
| Inner diameter | 3,90 - 4,10 mm | 6,2 - 6,5 mm |
| External diameter | 8,50 - 8,75 mm | 11,1 - 11,5 mm |
| Wall thickness eccentricity | max. 0,40 mm | max. 0,35 mm |
Colour
| Inner tube | natural |
| Casing | black |
| Cable armour | white |
| Glue | green-transparent |
| white |
Design / Packaging / Labeling
50 meter coil DN 4 (100-001 / 100-002) outer diameter approx. 520 mm, core diameter approx. 420 mm, loose in a box or pallet. Shorter lengths are marked separately. A share of up to 5% of the delivery quantity is permitted.
50 meter coil DN 6 (100-011 / 100-012) outer diameter approx. 480 mm, core diameter approx. 320 mm, loose in a box or pallet. Shorter lengths are marked separately. A share of up to 5% of the delivery quantity is permitted.
Download |
|
| Product - information for grease AF-2 NLGI 2 | |
| Safety data sheet for grease AF-2 NLGI 2 | |
| Technical datasheet for high pressure hose 100-001 / 100-011 filled | |
| Technical datasheet for high pressure hose 100-002 / 100-012 unfilled | |
| Assembling instruction high pressure hose | |
Our high-pressure hoses play a major role in all systems where maintenance is automated through application of a central lubrication unit. Of course, it is possible to use 600-840 bar high-pressure hoses for manual lubrication aids together with our nipple blocks.
A typical use of these types of hoses is as main lines in central lubrication units. Main lines are defined as the line path from the pump element of the piston pump to the first distribution unit, also referred to as manifold or main distributor.
However, the high-pressure hoses may also be used as secondary lines for the path between main distributor and the downstream secondary distributors, also referred to as sub-distributor.
Due to their excellent flexibility and their extremely hard-wearing surfaces, high-pressure hoses can be used for both manual lubrication and automated central lubrication systems.
For installation, the ends of the 600-840 bar high-pressure hoses are appropriately equipped with screw sleeves and tube studs and prepared for assembly. Apart from conventional box spanners, no other or special tools are required for assembly.
In our capacity as manufacturer, we are obliged to inform our customers that installation of high-pressure hoses and their connection elements must only be performed by appropriately trained qualified personnel.